Instructions for use
44
Programme Protection
To safeguard a programme setting against unwanted changes (e.g. pro-
gramme selector turned, option buttons pressed etc.) you can set the
programme protection. This prevents your washing being damaged.
3
Programme protection can be selected or cancelled at any time during
a programme.
Selecting programme protection:
0 1. Select the desired wash programme settings.
2. Press the START/PAUSE (MARCHE/PAUSE) button to start the pro-
gramme.
3. Press and hold down the PRE WASH (PRELAVAGE) and SENSITIVE (SEN-
SITIVE) buttons simultaneously for 5 seconds. The programme progress
display will flash for 5 seconds; programme protection has been set.
3
As long as the programme protection is set, you cannot make any other
settings. The door cannot be opened using the DOOR/LIGHT (PORTE/
LUMIERE) button. Even after the wash cycle has finished you will need
to cancel the programme protection before you can open the door.
If an attempt is made to change the selected settings during the wash
cycle by activating a button, the programme progress display will flash
for 5 seconds.
If you attempt to change the selected setting by turning the pro-
gramme selector, the programme progress display will flash until the
original setting of the programme selector is restored. The wash cycle
is not influenced in either case.
3
The programme selector must be in its original position in order to can-
cel the programme protection.
Cancelling programme protection:
0 Press and hold down the PRE WASH (PRELAVAGE) and SENSITIVE (SEN-
SITIVE) buttons simultaneously for 5 seconds. The programme progress
display flashes for 5 seconds and then remains illuminated constantly
for 5 seconds. Programme protection has been cancelled.
