
Instructions for use
26
3
The remaining wash time may increase or remain stationary during the
wash cycle because the wash programme adjusts itself to the various
conditions as the wash sequence progresses (e.g. type and quantity of
washing, identification of imbalance during spin cycle, special rinse
etc.).
MOISTURE%/LOADING% display
(HUMIDITE%/CHARGE%)
The following appear alternately in the
display:
• The expected residual moisture in the washing at the end
of the programme. This value depends on the set spin speed.
• The load in the drum (in graduations of 10 percent).
This value is only displayed for the COTTONS/LINEN, EASY-CARES
(BLANC/COULEURS, MIXTES) programme.
The washing machine cannot recognise the load until about ten min-
utes after a programme has started. As soon as a value for the load
is available the display alternates between residual moisture and
loading.
If the drum is too heavily loaded this is displayed with a value
of 120 (percent).
3
Due to the differences in fabric type and load, the remaining moisture
value is lower for EASY IRON (FACILE A REPASSER) and DELICATES
(DELICAT) than for COTTONS/LINEN, EASY-CARES (BLANC/COULEURS,
MIXTES) (cotton).
Changing the Spin Speed
The spin speed can still be changed during the wash programme, or
rinse hold (display 0) can be set.
Other settings cannot be changed.
Interrupting the Programme
0 To interrupt the wash programme before it is complete, turn the pro-
gramme selector to OFF (ARRET).
3
The wash programme can be interrupted at any time with the START/
PAUSE (MARCHE/PAUSE) button and can be continued by pressing the
button again.