Operating Instructions
41
Additional rinsing cycle +Á (RINSE+)
The washing machine is set for extremely economical water consump-
tion. However, for persons who suffer from allergies, it can be helpful
to rinse with more water.
3
If this function is set, an additional rinsing cycle is run with the pro-
grams t (COTTONS/LINEN), }(EASY CARES)/<(EASY IRON) and
à (DELICATES).
No additional rinse is set when the unit is delivered.
Set additional rinse:
0 1. Turn program selector to F (SHORT SPIN).
2. Keep the button q (SOAKING) pressed for at least 5 seconds.
After the button has been pressed for 5 seconds, +Á (RINSE
+) flashes
on the program sequence display for 5 seconds.
3. While +Á (RINSE
+) is flashing, release the button q (SOAKING).
After the flashing stops, the additional rinse cycle is set. It is active un-
til it is cancelled again.
If an additional rinse cycle is set, the display +Á (RINSE
+) lights up
on the program sequence display before the program start and during
the additional rinse cycle.
4. If you wish to check whether the additional rinse function is enabled:
– Turn program selector to F (SHORT SPIN).
– Briefly press the button q (SOAKING).
The additional rinse cycle is set when +Á (RINSE
+) flashes on the
program sequence display.
Cancel additional rinse:
0 1. Turn program selector to F (SHORT SPIN).
2. Keep the button q (SOAKING) pressed for at least 5 seconds.
+Á (RINSE
+) flashes on the program sequence display as soon as the
button is pressed. After 5 seconds, +Á (RINSE
+) stops flashing and
lights up constantly for a further 5 seconds.
3. While +Á (RINSE
+) lights up constantly, release the button q (SO-
AKING).
After +Á (RINSE
+) has stopped lighting up, the additional rinse cycle
is cancelled.
3
An additional rinse cycle increases water consumption and the program
duration.
