Operating Instructions
41
Program Saving
To safeguard a program setting against unwanted changes (e.g. pro-
gram selector turned, press additional button etc.), you can set Program
Saving. This prevents your washing being damaged.
3
It is possible to set and cancel Program Saving at any time during a
program.
Select program protection:
0 1. Select the desired program settings.
2. To start the program, press the button START/PAUSE.
3. Keep the button PRE-WASH and the button SOAKING pressed simulta-
neously for 5 seconds. The program sequence display flashes for
5 seconds; The program saving function is set.
3
No other settings can be made as long as Program Saving is set. The
door cannot be opened with the button DOOR/LIGHT. Also, after the
washing cycle has ended, you must first cancel the program safeguard
before you can open the door.
If, during the washing cycle, you attempt you attempt to change the
selected setting by pressing a button, The program sequence display
flashes for 5 seconds.
If you attempt to change the selected setting by turning the program
selector, the program sequence display flashes until the program selec-
tor is restored to its original setting. The washing cycle is not affected.
3
The program selector must be in its original position before you can
cancel the program saving.
Delete program protection:
0 Keep the button PRE-WASH and the button SOAKING pressed simulta-
neously for 5 seconds. The program sequence display flashes for
5 seconds, then it lights up constantly for 5 seconds. Program saving is
cancelled.
