Instructions for use
43
Water cooling
It may be necessary to cool the wash water before pumping out in or-
der to prevent damage to plastics draining pipes.
3
The wash water is cooled before pumping out at the end of the main
wash cycle (by the addition of cold water).
(This setting is only effective for the programme COTTON/LINEN,
EASY-CARE (KOCH/BUNT, PFLEGELEICHT,
BLANC/COULEURS, TEXTILES MELANGES) with a temperature over
40 °C.)
When supplying the appliance, no water cooling is set except for the
additional programme DELICATES (FEINWÄSCHE, DELICAT).
Setting water cooling:
0 1. Turn programme knob to SHORT SPIN (SCHONSCHLEUDERN, ESSORAGE
DELICAT).
2. Keep the PRE WASH (VORWÄSCHE, PRELAV.) button depressed for at
least 5 seconds.
After the button has been depressed for 5 seconds, the MAIN WASH
(HAUPTWÄSCHE, LAVAGE) will blink on the programme cycle display
for 5 seconds.
3. Whilst MAIN WASH (HAUPTWÄSCHE, LAVAGE) blinks,
release PRE WASH (VORWÄSCHE, PRELAV.) button.
When the blinking has stopped, the water cooling isset. It remains set
until it is canceled.
4. if you want to check whether the water cooling is set:
– Turn the programme knob to SHORT SPIN (SCHONSCHLEUDERN,
ESSORAGE DELICAT).
– Press the PRE WASH (VORWÄSCHE, PRELAV.) button briefly.
If the MAIN WASH (HAUPTWÄSCHE, LAVAGE) blinks on the programme
cycle display, then the water cooling is set.
