
Operating Instructions
33
The filling door cannot
be opened when the
unit is switched on.
The filling door is locked due
to a high water level or a
high temperature. The
K
(DOOR) display is off.
Wait until the
K
(DOOR) dis-
play lights up green.
If it is still necessary to open
the filling door:
turn the program selector to
I (OFF) turn the program
selector to C (PUMP OUT).
Press the O/s (START/
PAUSE) button.
After the water has been
pumped out, the filling door
can be opened.
Power failure!
(All displays have gone off).
For safety reasons the door
remains locked for 4 to
5minutes.
If water can be seen through
the window in the door, first
carry out emergency empty-
ing (see section “Carrying out
Emergency Emptying Opera-
tion").
After approx. 4 to 5 minutes
the door can be opened
again by pulling the handle.
Remnants of detergent
are building up in the
detergent drawer.
Water valve not fully opened. Open the water valve fully.
Filter in the screw connec-
tion of the intake hose on
the water valve or on the
unit is blocked.
Close the water valve. Un-
screw the intake hose from
the water tap and from the
unit. Clean the filter.
The rinsing water is
murky.
The cause is probably a de-
tergent with a high silicate
content.
No negative effect on the
rinsing result, use liquid de-
tergent if necessary.
The corresponding dis-
play does not light up
when one of the addi-
tional program but-
tons is pressed.
The selected additional pro-
gram cannot be combined
with the set program.
Make another selection.
Problem Possible Cause Remedy