Operating Instructions
18
Running a Wash Cycle
Brief instructions
A wash cycle consists of the following steps:
0 1. Open the door and load the washing.
2. Close the door.
3. Add detergent/conditioner.
4. Set the wash programme:
– Set the programme using the programme selector;
– Set the temperature using the temperature selector;
– Set any programme options if required.
5. If necessary, change the spin speed or select RINSE HOLD.
You can alter this setting and the temperature at any time during the
wash.
6. Press the ON/OFF button. Power indicator light comes on.
The washing machine has been switched on. The wash programme will
start.
When the wash programme has ended:
Important! If the wash cycle ended with a rinse hold, carry out PUMP
OUT or SPIN before opening the door.
3
For safety reasons, the door remains locked for 1-2 minutes after the
end of the programme.
7. Open the door and remove the washing.
8. Press the ON/OFF button. The power indicator light will go out.
The washing machine has been switched off.
