38
Electrical connection
Information about the mains power supply, the
nature of the power and the fuses to be used are
given on the washing machine name plate at the
back of the washing machine.
If the washing machine is directly connected to
the electrical installation (fixed connection), insert a two-pole switch with a
contact opening distance of not less than 3 mm.
This washing machine can only be connected to 230 V single phase power
supply.
Check that the subscriber’s meter and fuses are capable of carrying the
current required by the washing machine, allowing for other electrical
equipment connected at the same time.
Rating of line fuses (one for each phase) : 10 A in 230 V single phase.
Important
The installation shall comply with standard practice, the requirements of the
norms of your country.
Use a power outlet with an earthing pin, which shall be connected according
to the norms of your country.
The electrical power supply line from the meter shall not be smaller than 4
mm
2
per conductor.
If the mains power supply cable has to be replaced, have the work done by
the After Sales Service to make sure that it is done safely.
Make sure that the earthing connector is conform with the rules in force.
We cannot be held responsible if accidents or incidents are caused by a non-
existent or defective earth.
Installation and connection instructions
