Operating instructions
18
Performing A Washing Cycle
Brief Instructions
A washing cycle is performed in the following steps:
0 1. Set the correct washing program:
– select the program and the temperature with the program selector
– select additional program(s) if required
2. If required, change the spin speed/select (RINSE HOLD).
3. Set the (DELAY TIMER) if necessary.
4. Open the door, load the washing.
5. Close the door.
6. Add detergent/conditioner.
7. Start the washing program.
At the end of the washing program:
Important! If the washing cycle ends with a rinse hold, perform either
(PUMP OUT), (SPIN) or (SHORT SPIN) before opening
the door.
8. Open the door, remove the washing.
9. Switch off the washing machine: set the program selector
to (OFF).
