Run wash cycle
18
Run wash cycle
Brief instructions
A washing cycle consists of the following steps:
0 Open the door, put in the washing.
0 Shut the door.
0 Add detergent/conditioner.
0 Set the correct washing program:
– Set the program on the program selector;
– Set the temperature on the temperature selector;
– Select type of washing with the type of washing buttons.
0 Press M (On/Off) button.
Washing program starts automatically after six seconds. During these
six seconds:
0 Set any delay timer if required.
0 If applicable change final spin speed/select o (Rinse hold).
You can change this setting and the temperature during the entire
washing cycle.
After the washing program has finished:
Attention! If the washing cycle ends with a o (Rinse hold), run Pump
out (position 8) or Spin (position 6) before opening the door.
0 Open the door, remove the washing.
0 Press the M (On/Off) button!
