
Operating instructions
21
Wash Complete/Removing the Washing
The washing program is finished when the ON/OFF button indicator
lamp extinguishes.
After a Rinse Hold:
After a rinse hold the water must be pumped out first, or the washing
spun:
0 Either press one of the buttons to change the final spin speed/ (the
indicator lamp for the required spin speed illuminates)
or
turn the program selector clockwise to SPIN (washing is spun in accord-
ance with the program just completed),
or
turn the program selector clockwise to PUMP OUT (water is pumped
out).
Once the Program is Finished:
0 1. Open the door.
2. Remove the washing.
Important! The washing machine still needs to be switched off.
3. Press the ON/OFF button.
4. Close the water tap.
5. Pull out the detergent drawer a little so that it can dry out. Leave the
door ajar so that air can circulate in the washing machine.
Important! If the washing machine is not to be used for a long period:
close the tap and isolate the washing machine from the mains.