the same time until the indicator
comes on/goes off.
You can activate this function:
• After you touch Start/Pause : all the
buttons and the programme knob are
deactivated.
• Before you touch Start/Pause : the
appliance cannot start.
7.3 Permanent Extra Rinse
With this function you can keep the extra
rinse permanently on when you set a new
programme.
• To activate/deactivate this function
touch Zeit Sparen and Zeitvorwahl at
the same time until the display show
the indicator
comes on/goes
off.
8. OPTIONS
8.1 Touch Screen
Make sure the touch screen
and buttons are always clean
and dry.
8.2 Ein/Aus
Press this button to activate or deactivate
the appliance. A tune sounds when the
appliance is activated.
The AUTO Stand-by function
automatically deactivates the appliance
to decrease the energy consumption
when:
• You do not use the appliance for 5
minutes before you pressStart/Pause
button.
All setting are cancelled.
Press the button Ein/Aus to activate
the appliance again.
Set again the washing programme
and all possible functions.
• After 5 minutes from the end of the
washing programme
Refer to 'At the end of the
programme'
8.3 Programme knob
Turn this knob to set a programme. The
related programme indicator comes on.
8.4 Automatik Trocknen
Touch this button to set one of 3
automatic dryness levels proposed by
the appliance. On the control panel the
dryness indicators illuminate accordingly.
The text bar in the display shows the set
`dryness level:
• Iron dry – 1 indicator on: laundry to
be ironed
• Cupboard dry – 2 indicators on:
laundry to be put in store
• Extra dry – 3 indicators on: laundry to
be fully dried
You can not set all
automatic levels for each
type of fabrics.
8.5 Zeit Trocknen
Touch this button to set the time that
suits the fabrics you have to dry. The text
bar in the display shows the set value.
Each time you touch this button the time
value increases by 5 minutes.
You cannot set all time
values for different types of
fabrics.
8.6 Dampf
Touch this button to set the steam level.
This is possible only with programmes
where the steam function is available.
The duration of the steam phase
changes accordingly to your selection.
www.aeg.com
18
