4.4 Start/Pause button
4
Press button
4
to start or interrupt a
programme.
4.5 Delay start button
5
Press button
5
to delay the start of a
programme from 30 minutes to 20 hours.
4.6 Time save button
6
Press button 6 to decrease the duration
of the programme.
– Press one time to set 'Shortened dura-
tion' for items with daily soil.
– Press two times to set 'Extra Quick' for
items with light soil.
Some programmes accept only
one of the two functions.
4.7 Extra rinse button
7
Press button
7
to add rinsing phases to
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
4.8 Stain-Prewash button
8
Press button
8
to add the stain and/or
a prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
.
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
when you have laundry with a high lev-
el of soil.
The set of this function increases
the programme duration.
4.9 Spin button
9
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
4.10 Temperature button
10
Press button
10
to change the default
temperature. When the display shows
- -, the appliance does not heat the wa-
ter.
4.11 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
8
and button
7
at
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
4.12 Child lock function
This function prevents children to play
with the control panel.
• To activate the function, press button
10
and button
9
at the same time
until the display shows the symbol
.
• To deactivate the function, press but-
ton
10
and button
9
at the same
time until the symbol
goes off.
You can activate the function:
10
www.aeg.com
