C
Prewash phase
Washing phase
Rinses phase
Spin phase
The phase symbols
• When a programme is set, all the symbols of the phases related
to the programme come on.
• When the programme starts, only the symbol of the phase in
operation flashes.
• When the programme is completed, the symbol of the last
phase is on.
D
The steam symbol comes on when you set a Steam
programme.
E
The detergent overdosing symbol comes on at the
end of the cycle when the appliance detects too much
detergent.
F
You cannot open the appliance door when the symbol
is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol
stays on:
• The 'Rinse Hold' function is on.
• There is water in the drum.
G
The delay start symbol comes on when you set the de-
lay start function.
H
The child safety lock symbol comes on when this de-
vice is activated.
I
• The programme time
When the programme starts, the programme time
decreases with steps of 1 minute.
• The delay start
When you press the delay start button, the display
shows the delay start time.
• Alarm codes
If the appliance has a malfunction, the display shows
alarm codes. Refer to 'Troubleshooting'.
ENGLISH 9
