3.
Close the appliance door and press
button
4
. The programme or the
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1.
Deactivate the appliance.
2.
Wait for some minutes.
3.
Make sure that no water is
in the drum.
If you deactivate the appliance,
it is necessary to set the pro-
gramme again.
AT THE END OF THE PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
•
In the display
comes on.
• The indicator of the Start/Pause but-
ton
4
goes off.
• The door lock symbol goes off.
•
Press button
1
to deactivate the ap-
pliance. After five minutes from the
end of the programme, the energy
saving function automatically deacti-
vates the appliance.
When you activate the appli-
ance again, the display show the
end of the last set programme.
Turn the programme knob to
set a new cycle.
• Remove the laundry from the appli-
ance. Make sure that the drum is
empty.
• Keep the door ajar, to prevent mil-
dew and odours.
• Close the water tap.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent
the creases in the laundry.
–The door stays locked.
– You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed.
2.
Press the Start/Pause button
4
.
The appliance drain the water and
spin.
3.
When the programme is comple-
ted and the door lock symbol goes
off, you can open the door
4.
Deactivate the appliance.
The appliance drain and spin
automatically after approximate-
ly 18 hours.
ENGLISH
57
