7. SETTINGS
7.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Vlekken - Taches and Extra
Spoelen - Rinçage + at the same time for
6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
7.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press Temp.°C and T/min. at the
same time until the indicator
comes on/goes off.
You can activate this option:
• After you press Start/Pauze - Départ/
Pause : the options and the
programme knob are locked.
• Before you press Start/Pauze -
Départ/Pause : the appliance cannot
start.
7.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Tijd Besparen - Gain de Temps
and Startuitstel - Départ Différé at the
same time until the indicator Extra
Spoelen - Rinçage+ comes on/goes
off.
8. OPTIONS
8.1 Programme knob
Turn this knob to set a programme. The
related programme indicator comes on.
8.2 Start/Pauze - Départ/Pause
Press button Start/Pauze - Départ/Pause
to start or interrupt a programme.
8.3 Startuitstel - Départ
Différé
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator
and delay time.
8.4 Tijd Besparen - Gain de
Temps
With this option you can decrease the
programme duration.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set
'Extra Quick' for slightly soiled items
only.
Some programmes accept
only one of the two options.
8.5 Extra Spoelen - Rinçage+
With this option you can add some rinses
to some washing programmes, refer to
"Programme chart".
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
8.6 Vlekken - Taches
Set this option to add the stain phase to
a programme.
www.aeg.com
14
