7. OPTIONS
7.1 Temperature (Temp. °C)
Set this option to change the default
temperature.
Indicator
= cold water.
The indicator of the set temperature
comes on.
7.2 Spin (T/min.)
With this option you can decrease the
default spin speed.
The display shows the indicator of the
set speed.
Additional spin options:
No Spin
• Set this option to remove all spin pha-
ses.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
•
The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry crea-
ses.
• The door stays locked. You must drain
the water to unlock the door.
•
The display shows the indicator
.
To drain the water refer to ‘At
the end of the programme’.
7.3 Stain (Vlekken - Taches)
Set this option to add the stain phase to
a programme.
Use this option for laundry with hard
stains to remove.
When you set this option, put the stain
remover into compartment
.
This option increases the pro-
gramme duration.
This option is not available with a
temperature lower than 40 °C.
7.4 Extra Rinse (Extra Spoelen
- Rinçage+)
With this option you can add some rin-
ses to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
7.5 Time save (Tijd Besparen -
Gain de Temps)
With this option you can decrease the
programme duration.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set 'Ex-
tra Quick' for items with almost no
soil.
Some programmes accept only
one of the two functions.
7.6 Delay Start (Startuitstel -
Départ Différé)
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator.
7.7 Child Lock
With this option you can prevent that the
children play with the control panel.
•To activate/deactivate this option,
press Temp. and T./Min. at the same
time until the indicator
comes on/
goes off.
You can activate this option:
• After you press Start/Pauze - Départ/
Pause, the options and the pro-
gramme knob are locked.
• Before you press Start/Pauze - Départ/
Pause: the appliance cannot start.
7.8 Permanent extra rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
12
www.aeg.com
