7. SETTINGS
7.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Vlekken - Taches and Extra
Spoelen - Rinçage + at the same time for
6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
7.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press Temp.°C and T/min. at the
same time until the indicator
comes on/goes off.
You can activate this option:
• After you press Start/Pauze - Départ/
Pause : the options and the
programme knob are locked.
• Before you press Start/Pauze -
Départ/Pause : the appliance cannot
start.
7.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Tijd Besparen - Gain de Temps
and Startuitstel - Départ Différé at the
same time until the indicator Extra
Spoelen - Rinçage+ comes on/goes
off.
8. OPTIONS
8.1 Programme knob
Turn this knob to set a programme. The
related programme indicator comes on.
8.2 Start/Pauze - Départ/Pause
Press button Start/Pauze - Départ/Pause
to start or interrupt a programme.
8.3 Startuitstel - Départ
Différé
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The display shows the related indicator
and delay time.
8.4 Tijd Besparen - Gain de
Temps
With this option you can decrease the
programme duration.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set
'Extra Quick' for items with almost no
soil.
Some programmes accept
only one of the two options.
8.5 Extra Spoelen - Rinçage+
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
8.6 Vlekken - Taches
Set this option to add the stain phase to
a programme.
www.aeg.com
14
