7. OPTIONS
7.1 Temperature (Temp.)
Set this option to change the default
temperature.
Indicator
= cold water.
The indicator of the set temperature
comes on.
7.2 Spin (Centrif.)
With this option you can change the de-
fault spin speed.
The indicator of the set speed comes on.
Additional spin options:
Rinse Hold
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The drum turns regularly to prevent
the laundry creases.
• The door stays locked.
• You must drain the water to unlock the
door.
To drain the water refer to ‘At
the end of the programme’.
7.3 Extra Rinse (Aclarado
Extra)
With this option you can add some rin-
ses to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
7.4 Time save (Ahorra Tiempo)
With this option you can decrease the
programme duration.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set 'Ex-
tra Quick' for items with almost no
soil.
Some programmes accept only
one of the two functions.
7.5 Delay Start (Inicio Diferido)
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The indicator of the option is on.
7.6 Child Lock
With this option you can prevent that the
children play with the control panel.
•To activate/deactivate this option,
press Aclarado Extra and Ahorra Tiem-
po at the same time until the indicator
comes on/goes off.
You can activate this option:
• After you press Inicio/Pausa, the op-
tions and the programme knob are
locked.
• Before you press Inicio/Pausa: the ap-
pliance cannot start.
7.7 Permanent extra rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
•To activate/deactivate this option
press Ahorra Tiempo and Inicio Diferi-
do at the same time until the indicator
Aclarado Extra comes on/goes off.
7.8 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press Temp. and Centrif. at the
same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate when
the appliance has a malfunction.
10
www.aeg.com
