9.9 Opening the door
While a programme or the delay start
operates, the appliance door is locked
and the display shows the indicator
.
CAUTION!
If the temperature and level of
the water in the drum are too
high, you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press Başlat/Durdur to pause the ap-
pliance.
2.
Wait until the door lock indicator
goes off.
3.
Open the door.
4.
Close the door and press Başlat/
Durdur again. The delay start contin-
ues to operate.
Open the appliance door when the
programme operates:
1.
Press Açma/Kapama for some sec-
onds to deactivate the appliance.
2.
Wait for some minutes and then
open carefully the appliance door.
3.
Close the appliance door.
4.
Set the programme again.
9.10 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is ac-
tivated).
•
In the display a
comes on.
•The indicator Başlat/Durdur goes off.
•
The door lock indicator
goes off.
• Remove the laundry from the appli-
ance. Make sure that the drum is emp-
ty.
• Keep the door ajar, to prevent the mil-
dew and odours.
• Close the water tap.
• Press Açma/Kapama for some sec-
onds to deactivate the appliance.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent
the creases in the laundry.
–
The door lock indicator
is on. The
door stays locked.
– You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed.
2.
Press Başlat/Durdur. The appli-
ance drains the water and spins.
3.
When the programme is comple-
ted and the door lock indicator
goes off, you can open the
door.
4.
Press Açma/Kapama for some sec-
onds to deactivate the appliance.
The appliance drains and spins
automatically after approximately
18 hours (except for Wool pro-
gramme).
9.11 AUTO Stand-by option
The AUTO Stand-by option automatical-
ly deactivates the appliance to decrease
the energy consumption when:
• You do not use the appliance for 5 mi-
nutes before you press the button
Başlat/Durdur.
Press the button Açma/Kapama to ac-
tivate the appliance again.
• After 5 minutes from the end of the
washing programme
Press the button Açma/Kapama to ac-
tivate the appliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a
new cycle.
14
www.aeg.com
