Dil ID: 6
Dil Adı: turkish
Dil Kodu: tr2tayfun AEG Markası'nın Ürünleri
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



Position A for powder detergent (factory setting).
Position B for liquid detergent.
When you use the liquid detergent:
Do not use gelatinous or thick liquid detergents.
Do not put more liquid then the maximum level.
Do not set the prewash phase.
Do not set the delay start.
9.3 Activating the appliance
Press Marcha/Parada to activate or deac-
tivate the appliance. A tune sounds
when the appliance is activated.
9.4 Setting a programme
1.
Turn the programme knob and set
the programme:
The indicator Inicio/Pausa flashes.
The display shows the programme
duration.
2.
If necessary, change the tempera-
ture, the spin speed, the cycle dura-
tion, or add available options. When
you activate an option, the indicator
of the set option comes on.
If you set something incorrect,
the display shows the message
Err.
9.5 Starting a programme
without delay start
Press Inicio/Pausa:
The indicator Inicio/Pausa stops to
flash and stays on.
The programme starts, the door is
locked and the display shows the indi-
cator
.
The drain pump can operate for a
short time when the appliance fills wa-
ter.
After approximately 15 minutes
from the start of the programme:
The appliance adjusts auto-
matically the programme dura-
tion agree with the laundry
load.
The display shows the new val-
ue.
9.6 Starting a programme with
delay start
Press Inicio Diferido again and again
until the display shows the delay you
want to set.
Press Inicio/Pausa:
The appliance starts the countdown.
When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you
press Inicio/Pausa.
To cancel the delay start:
1.
Press Inicio/Pausa to set the appli-
ance to pause.
2.
Press Inicio Diferido until the display
shows
’.
Press Inicio/Pausa again to start the
programme immediately.
9.7 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press Inicio/Pausa. The indicator
flashes.
2.
Change the options.
3.
Press Inicio/Pausa again. The pro-
gramme continues.
9.8 Cancel a programme
1.
Turn the programme knob to
to cancel the programme.
2.
Turn again the programme knob to
a new washing programme. At this
time you can also set the available
functions.
The appliance does not drain the
water.
ENGLISH 13