Installation
Unpacking
All transit bolts and packing must be removed before using the appli-
ance.
Using a spanner,
unscrew and
remove the 2 rear
bottom screws.
Slide out the 2
plastic pins. Lay
the machine on its
back, taking care
not to squash the
hoses. This can be
avoided by placing one of the corner packing
pieces between the machine and the floor.
Remove the polystyrene block from the
bottom of the machine and release the two
plastic bags.
Carefully slide out the right-hand bag remov-
ing it towards the left and then upwards.
Slide out the left-
hand bag, remov-
ing it towards the
right and then
downwards.
Set the machine
upright and
unscrew the
remaining rear
screw. Slide out
the relevant pin.
46
