11Basic operation
• Use the OK/START button to switch from the menu item SETTINGS… to the
Settings sub-menu.
The Settings sub-menu
Here go to the desired setting using the direction buttons ( or ). In the info
status bar your position within the sub-menu is always shown.
• LANGUAGE
To set the language of the text line in the display; also see the section “Reset-
ting the language”.
• WATER HARDNESS
To set the value for water hardness electronically (value range 1 to 10).
• RINSE AID
When option 3 IN 1 is activated: Switch rinse-aid addition function on or off.
When option 3 IN 1 is not activated: The rinse-aid addition function is always
switched on, even if OFF is selected for RINSE-AID.
• SOUND VOLUME
To set the sound volume of the acoustic signals (value range 0 to 5); at 0 the
acoustic signals are switched off.
• BRIGHTNESS
To set the brightness of the display (value range 1 to 10).
• CONTRAST
1
To set the contrast of the display (value range 1 to 10).
Adjusting an option/setting
1. Go to the option or setting that you wish to adjust.
2. Press the OK/START button. The value that is currently set will flash.
3. Using the direction buttons ( or ) select the desired value.
4. Press the OK/START button. The newly set value is lit without flashing.
5. Using the direction buttons ( or ) you can select another option or setting.
3 A selected value is accepted using the OPTION button. In the display the first en-
try in either the Options or Settings menu is displayed.
3 You can abort the setting procedure using the RESET button.
1. not available with all models
