ter inlet hose starts to leak during this operation, the safety valve cuts off the running wa-
ter.
Please take care when installing the water inlet hose:
• The electrical cable for the safety valve is in the double-walled water inlet hose. Do not
immerse the water inlet hose or the safety valve in water.
• If water inlet hose or the safety valve is damaged, remove the mains plug immediately.
• A water inlet hose with safety valve must only be replaced by a specialist or by the Serv-
ice Force Centre.
WARNING!
Warning! Dangerous voltage.
Water outlet hose connection
The drain hose can face either to the right or left
of the dishwasher
Ensure the hose is not bent or squashed as this
could prevent or slow down the discharge of
water.
The sink plug must not be in place when the ma-
chine is draining as this could cause the water to
syphon back into the machine.
When connecting the drain hose to an under sink trap spigot, the entire plastic mem-
brane (A) must be removed. Failure to remove all the membrane will result in food parti-
cles building up over time eventually blocking the dishwasher drain hose spigot.
Water connection 29
