Cleaning the spray arms
Regularly check the nozzles in the 3 spray arms for
blockages. If necessary clean the nozzles with a
piece of fine wire or a fine needle and a strong
water jet.
Do not damage the nozzle openings.
Ceiling spray arm
1. Undo the fixing screw (A) by turning it anti-
clock-wise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm and the fixing screw.
4. Fasten the spray arm with the fixing screw (A)
by turning it clockwise.
Upper basket spray arm
1. Remove the upper basket spray arm by turn-
ing it laterally.
2. Clean spray arm nozzles.
3. To replace the spray arm, press upwards until
you feel it snap into place.
Lower spray arm
1. Undo the fixing screw (B) by turning it anti-
clockwise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm and the fixing screw.
4. Fasten the spray arm with the fixing screw (B)
by turning it clockwise.
External cleaning
Clean the external surfaces of the machine and control panel with a damp soft cloth. If
necessary use only neutral detergents. Never use abrasive products, scouring pads or sol-
vent (acetone, trichloroethylene etc....).
•
Polished chromium steel surfaces
Care and cleaning 23
