Dil ID: 6
Dil Adı: turkish
Dil Kodu: tr1tayfun AEG Electrolux Markası'nın Ürünleri
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



remaining time to the end of the program,
end of a washing program,
number of hours in delay start,
fault codes,
deactivation/activation of the audible signals.
Delay start button
Use the delay start button to delay the start of the washing program with an interval
between 1 and 19 hours. Refer to 'Select and start a washing program'.
Function buttons
Use the function buttons for these operations:
to set the water softener. Refer to 'Setting the water softener'.
to deactivate/activate the audible signals. Refer to 'Deactivation/activation of the audible
signals'.
to activate/deactivate the multitab function. Refer to 'Multitab function'.
to deactivate/activate the rinse aid dispenser when multitab function is active. Refer to
'Multitab function'.
to cancel the washing program in progress or a delay start in progress. Refer to 'Select
and start a washing program'.
Setting mode
The appliance is in setting mode when all the program indicator lights are on.
The appliance must be in setting mode for these operations:
to set a washing program,
to set the water softener level,
to deactivate/activate the audible signals,
to deactivate/activate the rinse aid dispenser.
If a program indicator light is on, cancel the program to go back to the setting mode. Refer
to "Select and start a washing program".
Audible signals
You can hear an audible signal:
at the end of the washing program,
during the setting of the level of the water softener,
when the appliance has a malfunction.
The activation of the audible signals is set at the factory.
Do these steps to deactivate the audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the indicator lights of function buttons
A, B and C start to flash.
4. Press the function button C.
Indicator lights for function buttons A and B go off.
Indicator light for function button C flashes.
The digital display shows the setting.
Audible signals deactivated
Control panel
7