To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the salt container and rinse aid dispenser.
3. Adjust the water hardness setting to the highest level.
4. Do a washing program without dishes.
5. Adjust the water softener to the water hardness in your area.
6. Adjust the rinse aid dosage.
Select and start a washing program
Set the washing program with the door ajar. The washing program only starts after you
close the door. Until then it is possible to modify the settings.
Follow these steps to set and start a washing program:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press one of the program buttons. Refer to the 'Washing programs' chart for program
details.
– The indicator light of the selected program stays on. All other program indicator
lights go off.
– The digital display shows the program duration.
4. Close the door.
– The washing program starts.
When the washing program operates, you cannot change the program. Cancel the washing
program. Refer to 'Cancelling a washing program'.
Select and start a washing program with delay start
1. Press the on/off button.
2. Set a washing program.
– The program indicator light comes on.
3. Press the delay start button until the display shows the necessary delay start of the
washing program.
– The delay start indicator light comes on.
4. Close the door.
– The countdown of the delay start starts.
– When the countdown is completed, the washing program starts automatically.
If you open the door during the countdown, it will interrupt the countdown. When you
close the door again, the countdown continues from the point of interruption.
Cancelling a delay start
1. Press and hold function buttons B and C until all the program lights come on.
– When you cancel a delay start, you also cancel the washing program.
2. Set a new washing program.
18
Select and start a washing program
