
The wash results are not satisfactory
Water drops have dried onto glasses and dishes • Increase rinse aid dosing.
• The detergent may be the cause. Contact the
detergent manufacturer’s consumer care line.
If after all these checks, the problem persists, contact your local Service Force Centre.
Technical data
Dimension Width - height - depth (cm) 59,6 x 81,8-87,8 x 59,5
Electrical connection - Voltage
- Overall power - Fuse
Information on the electrical connection is given on the rating
plate on the inner edge of the dishwasher's door
Water supply pressure Minimum - Maximum (MPa) 0,05 - 0,8
Capacity Place settings 12
Installation instructions
Installation
WARNING!
Any electrical and/or plumbing work required to install this appliance should be carried out
by a qualified electrician and/or plumber or competent person.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a drain.
Building-in
This dishwasher is designed to be fitted under a kitchen counter or work surface.
It is essential that the recess dimensions indica-
ted in the illustration are followed.
The height of the recess where the dishwasher is
to be installed can vary between 820 and 880
mm from the floor since the dishwasher is fitted
with adjustable feet (max. 60 mm).
No further openings for the venting of the dish-
washer are required, but only to let the water fill
and drain hose and power supply cable pass
through.
Leave a space of 2 mm between the top of the
dishwasher and the underside of the kitchen
counter.
During all operations that involve accessibility to
Technical data
25