ADS-tec Markası'nın Ürünleri

IWL3000 series 4

1.4 Trademarks

It is noted that any software and/or hardware trademarks and any company brand names as mentioned

in this documentation are all subject to the general trademark, brand name and patent protection rights.

Windows®, Windows® CE are registered trademarks of Microsoft Corp.

Intel®, Pentium®, Atom™ , Core™2 are registered trademarks of Intel Corp.

IBM®, PS/2® and VGA® are registered trademarks of IBM Corp.

CompactFlash® is a registered trademark of the Compact Flash Association.

RITTAL® is a registered trademark of the Rittal Werk Rudolf Loh GmbH & Co. KG.

Any other additional trademarks and/or brand names herein, be they domestic or international, are

hereby duly acknowledged.

1.5 Copyright

This manual including all images contained herein is subject to copyright. Third-party use of this manual

that infringes on the copyright terms is forbidden. Reproduction, translation, or electronic and

photographic archiving or alteration requires the express written consent of ads-tec GmbH.

Infringements or violations shall result in an obligation to provide compensation for damages.

1.6 Standards

This device is compliant with the provisions and safety objectives of the following EU directives:

Standards

 This device is compliant with the CE mark test requirements as defined in the

European test standards EN 55022 and EN 50082-2

 This device is compliant with the DIN EN 60950 (VDE0805, IEC950) testing

specifications on “Information technology equipment – Safety"

 This device is compliant with the DIN EN 60068-2-6 testing specifications

(sinusoidal vibration)

 The device is compliant with the DIN EN 60068-2-27 testing specifications

(shock resistance test)

Information:

A corresponding declaration of conformity is available for competent authorities at

the manufacturer and can be viewed upon request.

For full compliance with the EMC legislation, all components and cables used for

device connection must also be compliant with these requirements. It is therefore

necessary to employ BUS and LAN cables with shielded connectors and these

must be installed as per the instructions contained in the user manual.