Acnodes Markası'nın Ürünleri

FPC 5121

Industrial Fanless Panel PC

Safety Precautions

Before getting started, please read the following im portant safety precautions.

1. The FPC5121 does not come equipped with an operating s ystem. An operating

system m ust be loaded first before installing any software into the com puter.

2. Be sure to ground yours elf to prevent static charge when installing the internal components.

Use a grounding wrist strap and place all electronic components in any static-shielded

devices. Most electronic components are sensitive to static electrical charge.

3. Disconnect the power cord from the FPC5121 before any installation. Be sure both the

system and external devices are tur ned OFF. A sudden surge of power could ruin

sensitive components that the FPC5121 must be properly grounded.

4. The brightness of the flat panel display will be getting weaker as a result of frequent usage.

However, the operating period varies depending on the application environment.

5. Turn OFF the system power before cleaning. Clean the s ystem using a cloth only. Do not

spray any liquid cleaner directly onto the scr een. The FPC5121 comes with a

touchscreen. Although the touchscreen is chem ical resistant, it is recommended that you

spray the liquid cleaner on a cloth first before wiping the screen. In case your system comes

without the touchscreen, you must follow the sam e procedure and not spray any cleaner on

the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen. Scratches on the touchscreen m ay

cause m alfunction or internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or vibr ation. When assembling the

FPC5121, make sure it is securely installed.

8. Do not open the system’s back cover. If opening the cover for maintenance is a must, only a

trained technician is allowed to do so. Integrated circuits on computer boards are sensitive

to static electricity. To avoid damaging chips from electrostatic discharge, observe the

following precautions:

 Before handling a board or integrated circuit, touch an unpainted portion of the system

unit chassis for a few seconds. This will help to discharge any static electricity on your

body.

 When handling boards and components, wear a wrist-grounding strap, available from

most electronic com ponent stores.

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product informati on,

please visit Acnodes’ web site at www.acnodes.com.