Top Global USA. ----MB9000 User Guide
2.4 LED Indicators
The following table shows the status when the MB9000 is configured successfully and
running properly.
Table 2-1 Normal LED Indications
Power WLAN WWAN Ethernet
LAN
Off Power off Disabled Card inserted;
No Internet
connection
No cable
Green Power on and
normal
Enabled Card inserted;
Internet
connected
100Mbps mode
Green
Blink
N/A Enabled and
data
transmission
Card inserted ，
and data
transmission
100Mbps
mode, and data
transmission
Red N/A N/A No card 10Mbps mode
Red
Blink
N/A N/A N/A 10Mbps mode,
and data
transmission
Amber System error or
firmware lost
N/A N/A N/A
Amber
Blink
System booting N/A Internet
connecting
N/A
N/A: Not Available
2.5 Connect to the MB9000 Unit
1. There are two ways to connect your PC/laptop to MB9000:
a. Using Ethernet LAN
1） Verify the TCP/IP configuration of PC/laptop is set to be “Obtain IP address
Automatically”;
2） Connect your PC/laptop to LAN port of MB9000.
- 8 -
