3 En
Caution: Disconnect all components from AC outlets before proceeding.
Connection diagram
■ Preparing the speaker cables
1 Cut the included speaker cable to suitable
lengths for the front, center, and surround
speakers and a subwoofer. You need six cables.
2 Remove about 10 mm (3/8") of insulation from
the end of each speaker cable.
3 Twist the bare wires tightly so the individual
strands are not splayed.
Notes
• Make the speaker cables as short as possible. Do not
bundle or roll up excess cable.
• Be careful not to injure yourself while preparing the
speaker cables.
■ Operating the speaker terminals
1 Press and hold the terminal tab.
2 Insert the bare wire.
3 Release the tab so that it closes securely on the
bare wire, not the insulation.
4 Test the security of the connection by pulling
gently on the cable.
Notes
• Make sure the bare wires do not touch each other, as
this could damage the speaker or the amplifier.
• If the connections are faulty, you will hear no sound
from the speakers.
Method of connection
ANTENNA
FM
75
(
CD
)
(
TV
)
COAXIALCOAXIAL
OPTICAL
OPTICAL
AUDIO 6
CENTER
FRONT
HDMI 1
(
BD/DVD
)
HDMI 2 HDMI 3
SUB
WOOFER
SURROUND
HDMI
OUT
SUBWOOFER
SPEAKERS
VOLTAGE
SELECTOR
110V-
120V
220V-
240V
AUDIO 5AUDIO 4AUDIO 3AUDIO 2AUDIO 1
CENTER
FRONT
SUB
WOOFER
SURROUND
SPEAKERS
Center speaker
Subwoofer
Amplifier
Right
Left
Surround speakers
Right Left
Front speakers
Good No Good
10 mm (3/8")
2
3
1
Positive (+)
Negative (–)
Note: Make sure the
terminal is gripping
the bare wire, not
the insulation.
