© National Instruments Corporation 19 cFP-20xx Quick Start Guide
Power Requirement
Power supply range........................... 11 to 30 VDC
Recommended power supply
cFP-BP-4 system ........................ 15 W
cFP-BP-8 system ........................ 20 W
Power consumption
cFP-2000 .................................... 4.8 W + 1.1(I/O module power
requirements)
cFP-2010 .................................... 5.0 W + 1.1(I/O module power
requirements)
cFP-2020 .................................... 6.1 W + 1.1(I/O module power
requirements)
Physical Characteristics
Screw-terminal wiring ...................... 16–26 AWG copper conductor wire with
7 mm (0.28 in.) of insulation stripped from
the end
Torque for screw terminals ............... 0.5–0.6 N · m (4.4–5.3 lb · in.)
Weight of cFP-20xx .......................... 278 g (9.8 oz)
Environmental
FieldPoint modules are intended for indoor use only. For outdoor use, they must
be installed in a suitable sealed enclosure.
Operating temperature ...................... –25 to 60 °C
Storage temperature .......................... –40 to 85 °C
