10
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplier properly to
improve the image quality.
• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
• Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
(Only LJ523*)
Connect the terrestrial antenna to TV ANTENNA IN to listen to
crisp radio without having to install a separate antenna.
Connect an FM antenna cable to the radio antenna port.
• When connecting the FM antenna cable, straighten the
cable completely and set it in a position that delivers good
reception.
• Improving radio broadcast reception : If the reception
is poor in stereo mode, press the (Forced Mono)
button on your remote control. This may improve the radio
reception.
Adapter connection
(Depending on model)
• Please be sure to connect the TV to the AC-DC power
adapter before connecting the TV’s power plug to a
wall power outlet.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
• Supported HDMI Audio format :
Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz),
PCM (32 KHz, 44.1 KHz, 48 KHz, 96 KHz, 192 KHz)
(Depending on model)
Listening to the Radio
(Only LJ523*)
1 Press (HOME) and select FM Radio.
2 Listen to the radio by using the following menus/buttons.
3
2
4
1
5
No. Description
1
Current time.
2
Current preset number.
3
Audio mode. (Stereo, Mono, Forced Mono)
4
Current radio frequency.
5
Available buttons on the remote control.
Connections (notications)
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
• The external device connection may dier from the model.
• Connect external devices to the TV regardless of the order of the
TV port.
• If you record a TV programme on a DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
• Refer to the external equipment’s manual for operating
instructions.
• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
• In PC mode, some resolution settings may not work properly
depending on the graphics card.
NOTE
NOTE
DTS (44.1kHz / 48kHz),
