5.0 Performance Specifications
This device shall fully support all video color systems using pass-through capability.
The maximum video bandwidth shall be at least 10MHz. The maximum RGB bandwidth
shall be at least 150MHz. The device shall be capable of passing a resolution of at least
1280 x 1024 pixels at 60Hz refresh.
This device shall support audio signals within the frequency range of 20Hz to 20,000Hz
This device shall include four channels of built-in audio amplifiers. Two of these channels
should be capable of producing 90w per channel to 8 or 4 Ohm speaker loads. The
remaining two amplifiers should be capable of producing 50w per channel to 8 or 4 Ohm
speaker loads, or combined to produce 60w into high impedance (70v) line systems.
This device shall have a minimum audio signal to noise ratio of 94dB (IHF- A), with less
than -80dB of crosstalk between adjacent audio channels.
This device shall provide +48V DC (phantom) power to the microphone inputs for use with
condenser type microphones. This feature shall be switchable on or off independently for
each microphone input channel.
This device shall provide slots for the integration of two wireless microphone tuner
modules, for use with handheld or bodypack style transmitters. The transmitters and
modules shall be available from the supplying manufacturer as options. Dual UHF
antennas shall also be accommodated, as an option, to support full diversity reception on
the wireless system.
6.0 Dimensional Information
This device shall have maximum cabinet dimensions of 5.25 inches high by 19 inches
wide by14 inches deep. This device shall fit into a standard 19” EIA rack, occupying no
more than 3 EIA rack spaces. This device, without options, shall not weigh more than 27
pounds.
