41Room Monitor
11. Room Monitor
You can use your IT.6 handset to monitor the sounds in another room. If the sounds reach
a certain level the handset will automatically dial out to a pre-set external number or to
another handset. When the Room Monitor is set to On, the handset will display Room
Monitor On and only the microphone will be active to monitor the sound levels in the
room. Both the speaker and receiver will be set to O and the handset will not ring if there
is an incoming call.
11.1 Switch Room Monitor On
1. Press
Menu
, scroll to
Room Monitor
and press
OK
.
2.
On
is highlighted, press
OK
.
3. The handset returns to idle screen and the display shows
Room Monitor On
. To switch
o Room Monitor press
O
.
4. Press
to return to standby.
NOTE
If no receiver unit has been set (either an external number or additional handset number)
then the unit will beep and the display shows
Please set receiving unit
.
11.2 Set the receiver unit
1. Press
Menu
, scroll to
Room Monitor
and press
OK
.
2. Scroll to
Call
To
and press
OK
.
3. Scroll to
Internal
or
External
and press
OK
.
Internal
1. Press
OK
and the registered handset will be listed, for example “Handset 2”.
2. Scroll or to select the handset the Room Monitor will call if the noise levels reach a
certain level.
3. Press
OK
.
NOTE
If only one handset is registered the display prompts
No additional HS
and returns to
the previous screen. You must register additional handsets before the handsets will be
displayed and make Internal calls.
External
Either
1. Press
OK
,
Enter Number
is highlighted.
2. Press
OK
, enter the external number and press
OK
.
