X-TATIC SOUND CONTROL UNIT
X-TATIC SOUND CONTROL UNIT
23
1. Toggle the switch (fig. 1 / A) into the “VOL / PL” position.
2. Activate / deactivate the Dolby Pro Logic function with the
respectivebutton(g.1/B).
3. Adjust the volume using the buttons “Vol -” and “Vol +”
(fig. 1 / C).
fig. 1
6.2 TD / DRC
6.2.1 TD (Time-Delay)
The Time-Delay function allows to define a time delay for the
sound reproduction of each speaker. Thus a spacious
playback of the audio signal can be achieved. Note that
increasing the delay too much may cause unnatural results.
6.2.2 DRC (Dynamic Range Control)
Dynamic Range control limits the dynamic, decreasing the
level difference between loud and quiet passages in a
Dolby Digital 5.1 signal thus balancing the effect loudness.
ENGLISH
ABC
