95-8202
DASH DISASSEMBLY
TOYOTA MR2 SPIDER 2000-2005
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
Unsnap the lower trim piece from
each side of the dash console and
remove (2) Phillips screws exposed in
each cavity. Remove the upper trim
piece from each side of the console.
(Figure A)
2
Remove the climate control knobs
and (2) Phillips screws exposed.
Remove the climate control trim
bezel.
(Figure A)
3
Remove the ashtray and (1) 10mm
bolt exposed. Unclip the ashtray trim
bezel and remove.
(Figure A)
Unclip the radio trim bezel, remove
(4) Phillips screws securing the unit
and disconnect the wiring.
4
1
5
2
A
Continue to kit assembly.
7
6
Remove factory brackets from radio.
Retain brackets for use during kit
assembly.
