86A-2
V1
MR-453-X79-86A000$010.mif
86A
1. SCOPE OF THIS DOCUMENT
This document presents the fault finding method applicable to all computers with the following specifications:
2. PREREQUISITES FOR FAULT FINDING
Documentation type
Fault finding procedures (this document):
–Dialogys.
Wiring Diagrams:
–Visu-Schéma.
Special tooling required
3. SAFETY INSTRUCTIONS
Safety rules must be observed during any work on a component to prevent any material damage or personal injury:
– check the battery voltage to avoid incorrect operation of computer functions,
– use the proper tools.
4. GENERAL INFORMATION
For repairs or fault finding, the radio has a test menu (see self-test procedure).
The radio supply must be between 10.5 V and 16 V.
The radio will operate for approximately 60 minutes without the ignition being switched to the accessories position.
Vehicle(s): DUSTER
Function concerned: Radio R0-08
Special tooling required
Multimeter.
RADIO
Introduction
