To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
2
AROUND VIEW
®
MONITOR (if so equipped)
With the ignition switch in the ON position, the
Around View
®
Monitor is activated by pressing
the CAMERA button
1
, located on the
navigation unit, or by moving the shift lever to the
R (REVERSE) position. The monitor displays
various views of the position of the vehicle.
When the vehicle is in the P (PARK), N (NEUTRAL) or D (DRIVE) position and the
CAMERA button
1
is pressed, the following views will display in order:
NEW SYSTEM FEATURES
When the vehicle is in the R (REVERSE) position and the CAMERA button
1
is
pressed, the following views will display in order:
The colored guide lines on the display screen indicate vehicle width and approximate
distances to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).
For information regarding how to access additional viewing cycles, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual.
1
Start from any Control Panel screen
Front view & front-side view
Press
Press Press
Front view & bird’s-eye view
Rear view & bird’s-eye view
Press
Rear view & front-side view
Press
1781503_15b_Versa_Note_QRG_072814.indd 2 7/28/14 2:07 PM
