3-4.1 SRS Air Bag System Components Location
The SRS air bag system and inflators must not be cut as there is a risk of short circuit and unintentional
deployment of the SRS. However, the vehicle can be cut (except inflators) under the following conditions:
• The front, side and curtain air bags have deployed.
• At least three (3) minutes have passed after the 12V battery negative (-) cable has been
disconnected and the high voltage system has been shut down.
1. Crash zone sensor 2. Supplemental front-impact air
bag modules
3. Front seat-mounted side-impact
supplemental air bag modules
4. Roof-mounted curtain side-
impact supplemental air bag
inflators
5. Roof-mounted curtain side-
impact supplemental air bag
modules
6. Front door satellite sensors
7. Lap outer pretensioner (driver
side only)
8. Seat belt with pretensioner 9. Rear satellite sensors (located
in lower B-pillar)
10. Air bag control unit (ACU)
1
1 2 3 4 5
6 7
8 9 10
AAYIA0095ZZ
26
