GENERAL –TROUBLESHOOTING FOR INSPECTIONS, MODEL LINE-UP,
RELEVANT VEHICLE NUMBERS
00-1
SECTION 00
GENERAL
CONTENTS
Inspection guidelines and
troubleshooting..........................................1
Model line-up..............................................1
Relevant vehicle numbers ........................1
Inspection guidelines and troubleshooting
With the introduction of new settings for the MB992006 (Extra Fine Probe) special tool, the guidelines for inspecting the
connector have been changed. Other servicing guidelines remain unchanged.
Making an inspection with the connector
attached (so the electrical circuit is complete)
<non-waterproof connector>
The test bar should be inserted from the harness side. If the control
unit or the connector is too small, and the test bar cannot be
inserted, do not attempt to force it in. Instead, use the MB992006
(Extra Fine Probe) special tool.
Model line-up
