Dil ID: 14
Dil Adı: sloavakia
Dil Kodu: sk7tayfun Produkty značky Godex
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi
Anasayfa > Značky > Godex > Tlačiareň > EZPi1000 series
EZPi1000 User Manual
26
3-8. Error alerts
In the event of a problem that prevents normal functioning of the printer, you will see an
error message on the display and hear some beep signals. The LED indicators above the
display will also light up.
Fast flashing
Slow flashing
Light on
Error
message
displayed
LED above the display
Beeps
Description
Solution
RIBBO
N
MEDIA
Print
head is
open
Both LEDs
light up
4x2
beeps
The print
mechanism
is not
closed.
Please make sure
that the print
mechanism is
closed correctly.
Entering
cooling
process
Both
flashing
The print
head is too
hot.
Once the print
head has cooled
down, the printer
switches to
standby mode.
Out of
ribbon
3x2
beeps
No ribbon is
loaded.
Please make sure
that the printer is
set to thermal
direct mode.
The ribbon
is finished or
the ribbon
roll is not
moving.
Replace the
ribbon roll.
Out of
media
1x2
beeps
Unable to
detect the
paper.
Please make sure
that the gap
sensor is
positioned
correctly. If that
does not fix the
problem, run the
auto-detection
function again.
The labels
are
finished.
Replace the label
roll.
Paper jam.
Possible reason:
paper feed
problem.
CF card
not
formatte
d
Both
flashing
2x2
beeps
The CF
card is not
formatted.
Please follow the
instructions in
Section 4-4 to
format the CF
card.
Memory
full
2x2
beeps
The
memory is
full.
Delete data you
no longer need
from the memory
or use a CF card.
File name
not found
2x2
beeps
Unable to
find file.
Use the "~X4"
command to print
all file names and
check whether