EZPi1000 User Manual
3-3. Settings mode
In settings mode, you can change different settings, such as the printing mode,
accessories / options, or media type.
1. Switch on the printer and make sure that the message "Ready" is shown on the
display.
2. Press the PAUSE button and keep it pressed for about 3-4 seconds until you hear 3
beeps and the message "Settings" is shown on the display.
3. In settings mode, the buttons have the following functions:
: Minus / Enter
: Menu / Next
: Plus / Exit
4. Before you exit settings mode, the printer will prompt you to save the changes you
have made. Once you have saved or discarded your changes, the printer will
switch back to standby mode.
Press the
button and keep it pressed for about 3-4 seconds until you hear 3 beeps
and the message "Settings" is shown on the display. The options available are shown in
the lower section of the display.
In settings mode, the first line always
shows the name of a setting, the second
line the current selection or value.
To change the current selection or value,
press the ENTER button. The current
selection or value is highlighted.
When you change a setting, the first line
shows the name of the setting, the
second line the current selection.
Plus: The
button increases the value.
Minus: The
button reduces the
value.
Next: The
button switches to the next
settings option.
