Produkty značky Godex

EZ-2000+/6000+ User’s Manua

21. Put the washer on the antenna

connector and secure the

connector on the antenna

bracket using the nut.

22. Screw the antenna onto the

antenna connector. You can

now adjust the angle of the

antenna as required.

23. Replace the left-hand part of the

printer housing to complete the

installation.

【

Note 1

】

Once you have finished installing the Ethernet module, the command

"^XSET,USBETHERNET,1" must be sent to the printer to enable the Ethernet module. While

the Ethernet module is enabled, the USB port is disabled. To enable it again, send the

command "^XSET,USBETHERNET,0" to the printer.

【

Note 2

】

The wireless network must be configured via a network cable.