47
EZ-2000+/6000+ User’s Manua
4-6. Installing the cutter
Cutter cover (EZ2000 Plus)
Cutter cover (EZ6000 Plus)
【
Note 1
】
Remember to switch off the
printer before installing the
cutter.
【
Note 2
】
Do not use to cut adhesive labels!
Glue residue will be left on the
cutter blade and impair its
functioning.
The cutter has a blade life of
500,000 cuts when using paper
weighing 160 g/m² and 250,000
cuts when using paper weighing
200 g/m².
1. Unscrew the screw marked in
the illustration on the front of
the printer, which secures the
lower cover plate.
2. Remove the lower cover
plate.
【
Note
】
Switch off the printer before
starting the installation.
2. Remove the two screws
securing the tear-off plate,
then remove the tear-off
plate.
