Dil ID: 14
Dil Adı: sloavakia
Dil Kodu: sk3tayfun Produkty značky GE
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



For answers to your Monogram,
®
GE Profile
or GE
®
appliance questions, visit our website
at ge.com or call GE Answer Center
®
service,
800.626.2000.
110109
Specification Created 3/08
Listed by
Underwriters
Laboratories
ZISW/B360DX
GE Monogram
®
36" Built-In Side-by-Side Refrigerator with Dispenser and
Water Filter
Dimensions and Installation Information (in inches)
As an ENERGY STAR
®
partner, GE has determined
that this product meets the
ENERGY STAR
guidelines
for energy efficiency.
36" Side-by-Side (in inches)
A B C D E
1/4" Backer Panel 33-7/8 9 68-3/8 14-9/16 18-9/16
.10" Spacer Panel 33 8-3/8 67 13-1/4 17-1/4
3/4" Spacer Panel 34-1/8 9-1/4 68-5/8 14-13/16 18-13/16
Dispenser Cutout Position (in inches)
F G
36" Models 17-15/16 3-1/4
3/4" Overlay Panel Dimensions
For a more custom appearance,
overlay panels may be installed on
trimmed models. The overlay panel
must be secured to a 1/4"-thick
backer panel which slides into the
trim. A spacer panel 0.10" thick must
be placed between the overlay and
backer panels.
194Dia_64
Fresh
Food
Freezer
Panel
D
F
G
A
B
Grille Panel
C
Dispenser
Cutout
E
9-5/8"
194Dia_63
Dispenser Cutout
15-3/8"
194Dia_58
3/4"
Overlay
Panel
Door
.10"
Spacer
1/4"
Backer
Panel
Raised Overlay Panel Design
On Dispenser Models
When a raised panel design is to be used, a custom wide
middle rail is required to accept the dispenser trim.
The middle rail must be wide enough to allow for the
dispenser trim to overlap the opening.
The middle rail must be 1.100" total thickness to accept the
dispenser trim.
.250" + .10" + .750" =
1.100" Total Panel Thickness
NOTE: Left-to-right offset is not
always equal to top-to-bottom
offset.
* Cut the dispenser opening after the backer, spacer and
overlay panels have been assembled.
Important Note: Maximum total panel weight:
• Fresh food door panel – 75 lbs.
• Freezer door panel – 52 lbs.
• Grille panel – 18 lbs.
Center each panel over the
other. Assemble the panels with
glue and screws. Screws must
be countersunk into the backer
panel.
194Dia_65
Spacer Panel
Overlay Panel
Backer Panel
1/4" Backer Panel
3/4" Overlay Panel
Wide
Middle
Rail is
Required
194Dia82
Dispenser
Trim
16-3/4"
10-5/8"
.10" Spacer
Side View