Installation 5
3. Connect power3. Connect power
3. Connect power3. Connect power
3. Connect power
Connect the cable from the enclosed power supply adapter to
the
10-28 VDC10-28 VDC
10-28 VDC10-28 VDC
10-28 VDC power input on the Ericsson W25.
Connect the power cord to the power supply adapter and then
insert the plug into a mains outlet.
After power up, allow approximately one minute for start-up before
proceeding to the next step.
4.4.
4.4.
4.
Connect a PCConnect a PC
Connect a PCConnect a PC
Connect a PC
Attach the enclosed Ethernet cable to one of the
LAN LAN
LAN LAN
LAN (
1-41-4
1-41-4
1-4)
connectors on the Ericsson W25 and connect the other end to
the Ethernet connector on a PC. This connector is most likely
marked with this symbol:
5.5.
5.5.
5.
Connect a telephoneConnect a telephone
Connect a telephoneConnect a telephone
Connect a telephone
Connect a telephone to the
Phone Phone
Phone Phone
Phone connector on the Ericsson
W25. Use a telephone cable with RJ11 connector.
