Vigor3300 Series User’s Guide
20
IP Address Assign an IP address for the LAN interface.
Subnet Mask Assign the subnet mask for the LAN interface.
Status Click Enable to use DHCP server; click Disable to close
DHCP server; click Relay Agent to activate relay agent
function.
Start IP Assign the start IP address of the IP pool that DHCP server can
use for clients in LAN.
End IP Assign the end IP address of the IP pool that DHCP sever can
use for clients in LAN.
Primary DNS Type the IP address for primary DNS.
Secondary DNS Assign a private IP address to the secondary DNS.
Lease Time (Min) Set a lease time for the DHCP server. The time unit is minute.
Gateway IP (Optional) Set a gateway IP address for the DHCP server.
When you finished the above settings, please click Finish. A system reboot page will appear.
Click Apply to activate the PPPoE mode configuration.
