Vigor3300 Series User’s Guide
193
4. Confirm the settings are correct, and then finish the configuration.
Start to dial by using telephones.
Phone 1 calls Phone 2 --->Press 2901# or 888829*61*31*167*135#.
Phone 2 calls Phone 1--->Press 3301#.
Note: # indicates termination of the phone number. After pressing #, VoIP is immediately
called out. Or you may wait 3 seconds if you do not press #. With 2900V you can't only dial
alphanumeric addresses or @ symbols. To dial an IP address, start and end it with a # (hash)
replace the dots with * (star). In this example you have to press #220*135*240*207#. But
3300V can only receive the format of Number@IP. So it is required to setup 3300V's
) in the DialPlan entry.
